Unpacking guide: how to restore your beanbag's shape

Step 1 — Unpacking the box

Open the box and take out all the components. Your beanbag is protected by several layers of packaging to ensure safe transport.

Step 2 — Removing the protective layers

You will find:

  • A fabric cover with a zipper
  • Two layers of compressed plastic film

Carefully cut the plastic films using scissors.

⚠️ Be careful not to insert the blade too deeply to avoid damaging the beanbag.

Step 3 — Shaping (IMPORTANT)

This is the most important step for achieving an optimal result.

As the foam was compressed for transport, you must:

  • Air out and work the foam by hand for 10 to 15 minutes
  • Massage the entire beanbag to break up any foam clumps
  • Shake it vigorously
  • Turn it in different directions
  • Press on the sides to distribute the filling evenly

👉 This step ensures an even shape and prevents dents or harder areas from forming.

Step 4 — Shape recovery time

Then let the beanbag naturally regain its shape for 24 to 48 hours.

After 24 hours:

  • Work the beanbag again for a few minutes
  • Turn it over into different positions
  • Make sure the foam is evenly distributed

You can then start using it. Feel free to reshape it and reposition the filling if necessary during the first few days.

Step 5 — Final result & finishing touches

Between 72 hours and one week after unpacking, your beanbag will have reached its optimal shape.

You can then:

  • Enjoy your beanbag to the fullest
  • Remove the labels if you wish

If they are wrinkled:

  • Use an iron on a low setting
  • Place a cloth between the iron and the label to avoid damaging it